3dPrintDXB

Under Extrusion in 3D Printing

Under extrusion is a common problem in 3D printing where the printer doesn’t push out enough filament to form a solid print. This can lead to weak, incomplete, or even failed prints. Understanding the causes and how to fix under-extrusion can help you get better results from your 3D printer.

Join whatsapp group Join Now
Join Telegram group Join Now

What is Under Extrusion?

Under-extrusion happens when the 3D printer’s nozzle doesn’t release enough plastic filament. Instead of smooth, solid layers, the printed object may have gaps, missing layers, or look stringy and uneven. This problem can make your prints fragile and less accurate.

Under Extrusion

Causes of Under Extrusion

There are several reasons why under extrusion might occur:

  1. Clogged Nozzle: Over time, the printer’s nozzle can become partially clogged with leftover filament or debris, making it difficult for the plastic to flow out smoothly.
  2. Filament Issues: If the filament is old, brittle, or of low quality, it might break or not feed properly into the extruder, causing under-extrusion.
  3. Incorrect Print Settings: The printer settings, such as temperature and extrusion speed, can also lead to under-extrusion if they are not set correctly for the type of filament being used.
  4. Tension in the Extruder: If the extruder’s gears are not gripping the filament tightly enough, the filament might slip, leading to under-extrusion.
  5. Extruder Motor Problems: A weak or malfunctioning extruder motor might not push the filament through at the correct rate, causing insufficient extrusion.

In this picture above you can see how under extrusion looks like. This is happening because of partially clogged nozzle.

How to Fix Under-Extrusion

To fix under-extrusion, you can try the following steps:

  1. Check and Clean the Nozzle: Regularly clean the nozzle to remove any clogs or debris. You can use a cleaning filament or a thin needle to clear any blockages.
  2. Use Quality Filament: Always use high-quality filament and store it properly to prevent moisture absorption, which can lead to poor extrusion.
  3. Adjust Print Settings: Make sure that the print temperature and speed settings match the filament you are using. If you are unsure, check the filament manufacturer’s recommendations.
  4. Tighten the Extruder: Ensure the extruder is gripping the filament correctly. You may need to adjust the tension to make sure the filament feeds smoothly.
  5. Check the Extruder Motor: If the extruder motor is weak or malfunctioning, it might need repair or replacement. Make sure the motor is functioning properly and delivering enough force to push the filament.

Conclusion

Under extrusion can be frustrating, but it’s a problem that can often be solved by taking a few simple steps. By regularly maintaining your 3D printer, using good quality filament, and ensuring your print settings are correct, you can avoid under extrusion and enjoy smoother, more reliable prints.

Also check out this article on other defects than can happen in 3d printing and their causes –> common defects in 3d fdm printing

Join whatsapp group Join Now
Join Telegram group Join Now

Important Links
What is a 3d printer? Industrial 3D Printer Price In India Bambu Lab New A1 Mini & AMS Lite Review
What is 3d printing? How To 3D Print A Lithophane? Best 3D Printed Image Pratham 3D Printer
What is a FDM 3d printer? Best Creality 3D Printers 3D Printed Wind Up Car
3D Printer Parts List How To 3D Print A Double Spiral Vase? How to 3d print a bubble fountain?
Is 3D Printing Expensive In India? How to 3d print a blue rose? 3D Printing Technology PPT And PDF | 3D Printing PPT
Best 3D Printer Filaments Best Resin 3D Printers | SLA and DLP 3D Printers Best 3d Printed Water Pump with 775 Motor

Defects in FDM 3D Printing

Common Defects in 3D Printing Warping in 3d printingLayer shifting in 3d printing
Stringing in 3d printingUnder extrusion in 3d printingOver extrusion in 3d printing
Layer delamination in 3d printingBlobs and zits in 3d printingElephant’s Foot in 3d printing
Poor surface finish in 3d printingClogged nozzle finish in 3d printingGaps in Walls or Top Layers in 3d printing
Pillowing in 3d printing

Exit mobile version